ELECTRICAL
INSULATING
OILS
|
 |
These oils have desirable aquatic toxicity and carcinogenicity
characteristics. Additional information is available upon request.
TYPICAL PROPERTIES
| PROPERTY |
TEST METHOD |
TYPICALS |
| Standard
Specification |
ASTM D
3487 |
Type
II |
| Viscosity, max cSt @
40°C |
ASTM D
445 |
9.54 |
| Viscosity, max cSt @
100°C |
|
2.31 |
| Specific Gravity, max,
15°C/15°C |
ASTM D
4052 |
.887 |
| Pour Point, max,
°C |
ASTM D
97 |
-54 |
| Color, max |
ASTM
D1500 |
0.5 |
| Flash Point, min, COC,
°C |
ASTM D
92 |
151 |
Interfacial Tension @
25°c,
min, dynes/cm |
ASTM D
971 |
49 |
| Aniline Point, min/max,
°C |
ASTM D
611 |
70.7 |
| Dielectric Breakdown,
min, kV |
ASTM D
877 |
43 |
| Power Factor, max,
25°C, % |
ASTM D
924 |
.003 |
| Power Factor, max,
100°C, % |
ASTM D
924 |
.042 |
Oxidation
Stability
72 hr: % Sludge by mass, max
total acid number, max, mg
KOH/g
164 hr: % Sludge by mass, max
total acid number, max, mg
KOH/g |
ASTM D 2440 |
0.1
0.1
0.1
0.1 |
Oxidation Stability
(Rotating Bomb Test),
min, minutes |
ASTM D
2112 |
223 |
Oxidation Inhibitor
Content,
max, wt% |
AASTM D
2668 |
0.22 |
| Corrosive
Sulfur |
ASTM D
1275
(modified version) |
Noncorrosive |
| Water, max,
ppm |
ASTM D
1533 |
15 |
Neutralization
Number,
max, mg KOH/g |
ASTM D
974 |
<0.01 |
| PCB Content,
ppm |
ASTM D
4059 |
ND |
| Polycyclic Aromatic
Compound, % (w/w) |
IP
346 |
<2 |
| Modified Ames
Assay |
ASTM E
1687 |
Pass |
|
